Cissell DX4 CONTROLLER Bedienungsanleitung PDF herunterladen (Seite 9)

Error Codes

FB08-15 Page 9 of 18

Control Type: PS40 and PS40F

NOTE: Alarm codes are used to alert the operator to problems with the machine function. The alarms do

not indicate safety problems, therefore they do not interrupt the machine operation. When an alarm code is

displayed the operator should make a note of the alarm code and contact a qualified technician.

NOTE: Certain error indicators will prevent the start of a cycle or stop a cycle in progress until corrected.

Error Code Probable Cause Possible Corrective Actions

A0 Program key in wrong position

when trying to access

PROGRAM Mode.

• Correct position of program

key

A2 The program selected does not

exist.

•

Select another program

A3 The program was not pre-

programmed or memory has

been lost.

• Replace E Prom

A4 The programmed water level

was not reached after 15

minutes.

• Check inlet water supply

• Inspect inlet water valves

• Inspect drain valve

• Check water level switch

A5 The programmed temperature

was not reached after 60

minutes.

• Check auxillary heating system

• Inspect temperature sensor

• Check water safety level

switch

A6 The temperature in the cylinder

is unsafe at the end of the cycle.

• Allow laundry to cool down

before removing

A7 The level switch detects water

remaining in the drum at the end

of the cycle.

•

Inspect drain valve

• Check drain outlet

A8 Temperature sensor or

temperature sensor circuit is

defective.

• Replace temperature sensor

• Repair sensor wiring

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Cissell DX4 CONTROLLER Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern