
Error Codes
Page 16 of 18 FB08-15
ERROR 13 (Temperature Error) At startup, the temperature is
higher than 95
o
C or after 6
minutes the temperature is still
lower than 6
o
C or higher than
95
o
C
•
Inspect temperature sensor
• Check water temperature
• Check programmed
temperature
ERROR 15 (Level Sensor Error) At startup the water level is
lower than 4cm, higher than 2cm
(positive offset) or higher than
10cm (negative offset)
• Check inlet water supply
• Inspect inlet water valves
• Inspect drain valve
• Check water level switch
ERROR 16 (Can
Communication Error)
No communication between the
mainboard and the display board
• Inspect the wiring between
mainboard and display board
ERROR 17 (Wrong Machine
Type)
Wrong machine type
programmed with the wash data
• Program correct machine type
ERROR 18 (Wrong Wash Data
Error)
Wrong wash data for the
corresponding machine
• Program correct wash data for
machine type
ERROR 19 (ID Chip Read
Error)
Error reading indentification
chip
• Verify correct chip is in
machine
• Check wiring
ERROR 20 (ID Chip Write
Error)
Error by a writing action to the
identification chip
• Program correct action to the
ID Chip
• Check wiring
ERROR 21 (MMC Transfer
Error)
Error during the transfer of data
to MMC Card
• Check wiring
ERROR 22 (Door lock Error) Door will not lock after 5 failed
attempts in 10 seconds
• Check door lock circuit
• Inspect door lock mechanism
ERROR 23 (Wash Data Version
Error)
The wash data is not
corresponding with the type of
display
•
Reprogram wash data
ERROR 24 (Wrong Display
Type Error)
Wrong display type programmed
•
Check display type
ERROR 25 (Wash Data Backup
Error)
Wash data will not backup
• Check wiring
• Check for sufficient space to
save backup data
Error Code Probable Cause Possible Corrective Actions
Kommentare zu diesen Handbüchern