
Error Codes
Page 18 of 18 FB08-15
Table 9
ERROR 52 (Drain Error) Water level is not lowered within
2cm after 2 minutes upon
completion of a wash cycle
(Machines with a drain valve,
water level must be “0” after 8
minutes upon completion of a
wash cycle and machines with a
pump drain, water level must be
“0” after 4 minutes)
•
Inspect drain valve
• Check drain outlet
ERROR 53 (Heating Error) The programmed temperature is
not reached after 20 minutes
• Check auxillary heating system
• Inspect drain valve
• Check water level switch
ERROR 54 (Fill Error) The programmed water level is
not reached after 6 minutes
• Check inlet water supply
• Inspect inlet water valves
• Inspect drain valve
• Check water level switch
ERROR 55 (Rotation Sensor) The rotation signal is missing for
30 seconds
• Check rotation sensor
ERROR 56 (Spin Retry Error) Programmed number of
imbalances is reached
• Check load size and type
• Check for an unbalanced load
ERROR 57 (Ext Error) Error during extraction
• Check load size and type
• Check for an unbalanced load
ERROR 58 (Dry Error)
•
ERROR 59 (Door Open Error) The door is open or unlocked
during the operation of the
machine
• Check door lock circuit
• Inspect door lock mechanism
Error Code Probable Cause Possible Corrective Actions
Kommentare zu diesen Handbüchern